Non-silicone Slip And Leveling Agent

Product Description

COATINGS

DELTA-SC 2777 has a very wide compatibility, which makes it extremely suitable for use in clear coatings. It improves levelling, prevents cratering and helps substrate wetting without damaging the inter-coat adhesion in multi-layer applications.

It is recommended in the following application systems:

•   Stoving enamels based on alkyd, acrylic and polyester resins
•   Polyurethane coatings
•   Two-pack epoxy compounds
•   Air-dried alkyd systems

DELTA-SC 2777 should be added at the end of the batch preparation. 0.4 TO 2.0% on total formulation weight

PRINTING INKS

DELTA-SC 2777 is recommended for free-radically and cationically mediated UV-curable printing inks and over-print varnishes.

It is also suitable for conventional alkyd-based printing inks and over-print varnishes, and for solventbased printing inks.

DELTA-SC 2777 will be effective in flexographic, screen and offset application to difficult substrates.

As it does not interfere with inter-coat adhesion, trapping or over-printing is not impaired and the product is suitable for process printing.

In over-print varnishes, DELTA-SC 2777 may be added at any stage of manufacture.

In printing inks, addition of DELTA-SC 2777 should take place after the dispersion step. In all cases care should be taken to ensure uniform distribution of the additive.

0.5 TO 2.0% on total formulation weight

Specification